MICRO IRRIGATION
 |
The Octa-Bubbler® is an eight-outlet, pressure compensating, low-flow irrigation device. Along with 8 flow-controlled swivel barbed outlets, it has a 1/2” FPT inlet thread base for installation on standard risers, and a backflow prevention device for added protection. | ||
 |
Our QB2® Bubbler is available in four color-coded models, with flow ranges of 2, 6, 10, and 20 GPH per outlet and uses a 1/2” FPT inlet thread base. The QB2® diaphragm is injection molded from liquid silicone rubber, which provides pressure compensation and uniform water application. | ||
 |
These turbulent flow drippers use the same concept as button drippers, but may be opened to be cleaned. They come in flow rates of 1 and 2 gph at 25 psi, and they have 1/4" barb inlet and outlet for easy installation. Operating Pressure: 25 PSI Flow Rate: 1 GPH |
||
 |
Pressure Compensating Button Dripper has a removable top for easy cleaning plus a large diaphragm for trouble free operation. Can be inserted into 1/4" microtube or directly into 1/2" poly tube. | ||
 |
Adjustable drippers allow the option of changing the flow for each individual plant. Twisting the dial on the dripper towards the "+" or the " -" signs will allow you to adjust the flow between 1 gph and 10 gph. Adjustable drippers are ideal when you need to control the water output of individual drippers. Adjustable dripper has 1/4" barb inlet mounted on spike. 1/4" micro tube can be inserted to spike. Allows you to mount the adjustable dripper a few inches above ground. 5" long from tip to tip Operating Pressure: 25 PSI Flow Rate: 0-10 GPH |
||
 |
One piece spray in 90, 180 and 360 degrees. Three different colors ranging from 3ft radius to 8ft radius | ||
 |
Mini-pepline is ideal for use in vegetable gardens, densely planted ground cover and for ringing trees and shrubs. Mini-pepline comes in two sizes, 6 inch spacing and 12 inch spacing. | ||
| home | |
| products | |
| company | |
| locations | |
| news | |
| resources | |
| contact |